Vaisala WMS302 Podręcznik Użytkownika Pobierz pdf (Strona 102)

User's Guide ______________________________________________________________________

100 __________________________________________________________________M210630EN-B

the leg. Use hammer to pound the ground pegs in. If the ground is

too hard for the pegs, fill the ground peg bag with sand and/or

stones. Attach the bag to the horizontal support bar with the straps.

0403-014

Figure 89 Adjusting the Leg

5. After you have leveled the station, secure the legs with ground pegs

by inserting a peg through the hole as shown in Figure 90 on page

100.

0404-035

Figure 90 Securing the Legs of the Tripod

6. For attachment of the wind sensor (number 1 in Figure 91 on page

101), the mounting piece has already been tightened with the small

hex screw (5) on the top of the wind mast. Guide the wind sensor

cable through the telescopic mast (if it is not already done) and

connect the cable to the sensor. To connect the sensor to the wind

mast, align the slot (3) on the bottom of the sensor with the metal

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 261 262

Brak uwag

Vaisala WMS302 Podręcznik Użytkownika Strona 102