Vaisala WXT520 Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Pomiary, testowanie i kontrola Vaisala WXT520. WXT520 Weather Transmitter [en] Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 22
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
WXT520 Weather Transmitter
Revision: 8/12
Copyright © 2006-2012
Campbell Scientific, Inc.
Przeglądanie stron 0
1 2 3 4 5 6 ... 21 22

Podsumowanie treści

Strona 1 - WXT520 Weather Transmitter

WXT520 Weather TransmitterRevision: 8/12 Copyright © 2006-2012Campbell Scientific, Inc.

Strona 2

WXT520 Weather Transmitter FIGURE 6-1. Optional WXT520 IP66 Mounting Kit 6.3 Bird Spike Kit The 25300 Bird Spike device is fastened on top of the W

Strona 3 - Warranty

WXT520 Weather Transmitter FIGURE 6-2. Optional bird spike device 6.4 Wiring Table TABLE 6-1. Connections to Campbell Scientific Dataloggers C

Strona 4 - Assistance

WXT520 Weather Transmitter 6.5 Commands Campbell Scientific uses the SDI-12 protocol to communicate with the WXT520. Both "aM!" and "a

Strona 5 - Table of Contents

WXT520 Weather Transmitter 6.6.1.1 Example CR1000 Program Although the following program is for the CR1000, the CR800, CR850, CR3000, and CR5000 are

Strona 6 - Figures

WXT520 Weather Transmitter 6.6.1.2 Example CR200(X) Program 'CR200/CR200X Series 'Declare Variables and Units Public BattV Public SDI12(7)

Strona 7

WXT520 Weather Transmitter 6.6.2 Edlog Programming Our CR500, CR510, CR10(X), and CR23X dataloggers are programmed with Edlog. These dataloggers us

Strona 8 - 5. Specifications

WXT520 Weather Transmitter 10

Strona 9 - 6. Installation

Appendix A. Configuring the WXT520 Modifying the default configuration of the WXT520 requires the purchase of a grey configuration cable; contact C

Strona 10 - 6.3 Bird Spike Kit

Appendix A. Configuring the WXT520 6. Go to the Device Settings Screen and enter the settings for each of the parameters (see FIGURE A-2). Default

Strona 11 - 6.4 Wiring Table

Appendix A. Configuring the WXT520 FIGURE A-3. Sensor Settings screen 9. Click on the OK button. 10. Go to the Message Settings Screen and verify

Strona 13

Appendix A. Configuring the WXT520 A-4 11. Click on the OK button. 12. Close the WXT Configuration Tool. 13. Remove the 9 V battery. 14. Disconne

Strona 15 - 6.6.2 Edlog Programming

Campbell Scientific Companies Campbell Scientific, Inc. (CSI) 815 West 1800 North Logan, Utah 84321 UNITED STATES www.campbellsci.com • info@campbel

Strona 16

Warranty “PRODUCTS MANUFACTURED BY CAMPBELL SCIENTIFIC, INC. are warranted by Campbell Scientific, Inc. (“Campbell”) to be free from defects in materi

Strona 17

Assistance Products may not be returned without prior authorization. The following contact information is for US and international customers residing

Strona 18

Table of Contents PDF viewers: These page numbers refer to the printed version of this document. Use the PDF reader bookmarks tab for links to spec

Strona 19

Table of Contents ii Figures 6-1. Optional WXT520 IP66 Mounting Kit... 4 6-2. Optional bird spike device.

Strona 20

WXT520 Weather Transmitter 1. Introduction The WXT520 Weather Transmitter, manufactured by Vaisala, measures wind speed and direction, precipitation

Strona 21

WXT520 Weather Transmitter The sensor is also capable of distinguishing hail stones from raindrops. The measured rain and hail parameters are cumulat

Strona 22

WXT520 Weather Transmitter 5.5 Air Temperature Measurement Range: -52° to +60°C Accuracy: ±0.3°C @ +20°C Output Resolution: 0.1°C 5.6 Relative Hum

Komentarze do niniejszej Instrukcji

Brak uwag