Vaisala HMP260 SERIES Instrukcja Obsługi Pobierz pdf (Strona 24)

HMP260 SERIES

Operating Manual HMP260-U017en-1.5

18 1997-11-25

Fig. 4.5 Connection of cables

When the serial bus has been connected between the PC and the transmitter,

the PC is switched on. When using a PC, a terminal emulation programme

(e.g. Procomm Plus, Datastorm or Windows terminal) is started.

The factory settings for data transfer are:

• 4800 baud

• even parity

• 7 data bits

• 1 stop bit

• full duplex

NOTE

When the serial bus settings are changed, the transmit-

ter has to be reset before the new settings become ef-

fective.

The processor does not allow the following combinations:

• no parity, 7 data bits, 1 stop bit: if this combination is given the

HMP260 programme will change the number of stop bits to 2

• even or odd parity, 8 data bits, 2 stop bits: if this combination is given

the programme changes the number of stop bits to 1

Refer to the manuals of the PC and the terminal emulation programme when

giving serial settings.

GND

HMP 2

D9S

D25S

D25P

TXD

RXD

TXD

RXD

TERMINAL

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 117 118

Brak uwag

Vaisala HMP260 SERIES Instrukcja Obsługi Strona 24