Vaisala HUMICAP MMT162 Podręcznik Użytkownika Pobierz pdf (Strona 39)

Chapter 4 _________________________________________________________________ Operation

VAISALA ________________________________________________________________________ 37

Set Voltage for LED Alarm

With the LED command, you can set a different voltage level for each

channel.

LED<cr>

Example:

led ?

Ch 1 Led Voltage : 2.80 V

Ch 2 Led Voltage : 2.80 V

Extend Analog Output Range

Use the AOVER command to allow the analog output channels to

exceed their specified range by 10 %. The scaling of the parameter

remains as before; the extra range is used for additional measurement

range in the wet end.

AOVER [ON/OFF]<cr>

Example:

aover on

: ON

Serial Line Output Commands

Start Measurement Output

Use the R command to start the continuous outputting of measurement

values as an ASCII text string to the serial line. The format of the

measurement message is set with the FORM command.

R<cr>

Example:

aw= 0.261 T= 23.8 'C H2O= 15 ppm

You can change the format of the output with the following commands:

- Outputting interval can be changed with the INTV command.

- Output message format can be changed with the FORM command.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 74 75

Brak uwag

Vaisala HUMICAP MMT162 Podręcznik Użytkownika Strona 39