Vaisala PTU200 Series Podręcznik Użytkownika Strona 38
- Strona / 64
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
USER'S GUIDE_______________________________________________________________________
34 ___________________________________________________________________ M210195EN-A
LCI Entering linear pressure corrections
LCI n <cr>
where:
n = number of the pressure transducer (1 or 2)
The LCI command is used to enter new linear offset and offset/gain
pressure corrections to the transmitter. Note that the linear corrections
are given to each pressure transducer separately.
Entering new linear corrections is protected by switch SW4. Turn the
switch SW4 to write ENABLE position (ON) to be able to enter new
linear and multipoint corrections to the transmitter.
Deactivate the previous corrections by using the LC OFF. Pre-
calibration of the transmitter then gives the required new corrections.
NOTE
The new linear corrections will always cancel the previous
corrections as well as the valid date of calibration of the transmitter
(see CALD command).
Activate the new linear corrections with the LC ON command. Use
ESC to abort without executing the command.
In the following, an example of performing an offset adjustment for
pressure transducer P1 and an offset and gain adjustment for pressure
transducer P2 is given.
>lc off <cr>
Linear adj. : OFF
>lci 1 <cr>
P1 1. reading ? 1013.25 <cr>
correction ? -0.1 <cr>
P1 2. reading ? <cr>
>lci 2 <cr>
P2 1. reading ? 800.00 <cr>
correction ? 0.05 <cr>
P2 2. reading ? 1000.00 <cr>
correction ? -0.02 <cr>
>lc on <cr>
Linear adj. : ON
Reading Correction Reading Correction
1013.250 -0.100 800.000 0.050
1013.250 -0.100 1000.000 -0.020
>
NOTE
Always remember to return the switch SW4 to write DISABLE
position (OFF).
- USER'S GUIDE 1
- Table of contents 2
- GENERAL INFORMATION 5
- Warranty 6
- PRODUCT DESCRIPTION 7
- GETTING STARTED 9
- Connecting the probe 11
- COMMISSIONING 13
- Operating modes 15
- Software settings 16
- Hardware settings 25
- OPERATING 29
- S Stopping the output 30
- POLL mode 31
- SEND mode 34
- CALIBRATION AND 35
- ADJUSTMENT 35
- IGURE 6-1) 37
- Humidity 42
- Temperature 43
- = -0.13°C 44
- SELF-TESTING AND 47
- PROBLEM HANDLING 47
- Diagnostic commands 48
- VERS Software version 49
- SNUM Serial number 49
- ERRS Error message output 49
- TECHNICAL DATA 51
- Mechanics 54
- Dimensions 55
- Electromagnetic compatibility 56
- Accessories 56
- PTU200 TRANSMITTERS 57
- Ashtech Z-12 type receiver 60
- APPENDIX C NMEA DATA FORMAT 62
- GPS Commands 63
- Serial number 64
Powiązane produkty i podręczniki dla Pomiary, testowanie i kontrola Vaisala PTU200 Series
(191 strony)Medal-sports SH1339618 manuales
Manuales del propietario y guías del usuario para Juegos Medal-sports SH1339618.
Ofrecemos 1 manuales en pdf Medal-sports SH1339618 para descargar gratis por tipos de documentos: Manual de usuario
Komentarze do niniejszej Instrukcji