Vaisala HUMICAP HMT310 Podręcznik Użytkownika Strona 77
- Strona / 105
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Chapter 6 ___________________________________________________ Calibration and Adjustment
VAISALA ________________________________________________________________________ 77
Humidity Calibration and Adjustment (in One
Point)
1. Remove the transmitter unit from the mounting plate (see
Mounting the Transmitter/Removing the Transmitter Unit on page
22) and press the adjustment button once (see Figure 18 on page
74).
2. Remove the probe filter (see instructions on page 65) and insert the
probe into the reference humidity (for example, use a humidity
generator such as the HMK 15 Humidity Calibrator or salt
solutions).
3. Let the sensor stabilize.
4. Issue the CRH command and press Enter.
5. Type C and press Enter a few times to check if the reading is
stabilized.
6. When the reading is stabilized, type the reference humidity after
the question mark and press Enter three times (to set the first RH
reference, acknowledge the “Press any key when ready …”
message, and leave the second reference point unset).
>crh
RH : 26.00 Ref1 ? c
RH : 26.00 Ref1 ? c
RH : 26.00 Ref1 ? c
RH : 26.00 Ref1 ? c
RH : 26.00 Ref1 ? c
RH : 26.00 Ref1 ? 33
Press any key when ready ...
RH : 26.00 Ref2 ?
OK
>
OK indicates that the calibration has succeeded.
7. Take the probe out of the reference conditions and replace the
filter. When using the stainless steel filter, take care to tighten the
filter properly (recommended force 130 Ncm).
8. If needed, record the calibration information (text and date) to the
memory of the transmitter: see Set Calibration Information Text on
page 71 and and Set Calibration Date on page 72.
9. Reset the transmitter by issuing the RESET command. The
transmitter returns to normal mode.
- USER'S GUIDE 1
- Table of Contents 3
- CHAPTER 4 4
- CHAPTER 5 5
- CHAPTER 6 5
- CHAPTER 7 6
- APPENDIX A 6
- List of Figures 7
- List of Tables 8
- GENERAL INFORMATION 9
- Version Information 10
- Related Manuals 10
- Documentation Conventions 10
- ESD Protection 11
- Recycling 12
- Regulatory Compliances 12
- Trademarks 13
- Software License 13
- Warranty 13
- PRODUCT OVERVIEW 15
- Output Quantities 16
- HMT310 Transmitter Parts 17
- Probe Options 18
- Filter Options 19
- Sensor Options 19
- INSTALLATION 21
- Transmitter Unit 22
- 0507-035 23
- Mounting the Probes 25
- 0507-024 26
- 0507-040 28
- 0507-041 30
- CAUTION 32
- Connections 33
- Power Supply Requirements 34
- OPERATION 35
- USB Connection 37
- Indicator 38
- Terminal Program Settings 39
- List of Serial Commands 40
- Measurement Output 42
- Output Reading Once 43
- Set Serial Interface Mode 43
- Serial Line Settings 43
- Output Formatting 45
- Set Time and Date 47
- Outputs 47
- Commands) 49
- Other Commands 50
- Addresses 51
- List Commands 51
- Set Result Filtering 52
- Reset Transmitter 53
- Display Error Messages 53
- Set Analog Output Mode 54
- Scale Analog Outputs 55
- Test Analog Outputs 56
- Readings 56
- Chemical Purge (Optional) 57
- Output signal 58
- Set Chemical Purge Interval 59
- Chemical Purge in Powerup 60
- Sensor Heating (Optional) 61
- Sensor Heating ON/OFF 62
- Setting Heating Parameters 62
- Example: 63
- MAINTENANCE 65
- Changing the Sensor 66
- Technical Support 67
- Product Returns 67
- CALIBRATION AND ADJUSTMENT 69
- Sensor Change 71
- Set Calibration Date 72
- Analog Output Calibration 72
- (in Two Points) 73
- Low End Adjustment 74
- High End Adjustment 75
- One Point) 76
- MPC Command Syntax 78
- Starting MI70 Adjustment 81
- Adjusting RH with MI70 82
- Adjusting T with MI70 83
- 1-point T adjustment 84
- 2-point T adjustment 84
- Environment Settings 85
- Last Adjustment Date 85
- TECHNICAL DATA 87
- 0507-021 88
- Calculated Variables 90
- Dewpoint Temperature 92
- Spare Parts and Accessories 93
- Dimensions in mm (inches) 94
- Rain Shield Dimensions 95
- 120 (4.72) 96
- 12 (0.47) 96
- Figure 26 HMT314 Dimensions 97
- Figure 27 HMT315 Dimensions 97
- Figure 28 HMT317 Dimensions 98
- Figure 29 HMT318 Dimensions 98
- PROBE INSTALLATION KITS AND 99
- INSTALLATION EXAMPLES 99
- HMT317) 100
- Cable Gland 101
- 0508-027 102
- *M210619EN* 105
Powiązane produkty i podręczniki dla Elementy urządzeń bezpieczeństwa Vaisala HUMICAP HMT310
(18 strony)Medal-sports SH1339618 manuales
Manuales del propietario y guías del usuario para Juegos Medal-sports SH1339618.
Ofrecemos 1 manuales en pdf Medal-sports SH1339618 para descargar gratis por tipos de documentos: Manual de usuario
Komentarze do niniejszej Instrukcji