Vaisala HUMICAP HMP46 Podręcznik Użytkownika Pobierz pdf (Strona 24)

HMI41 AND PROBES

Operating Manual M210316EN-A

6. HMI41 AND DATA COLLECTING

The HMI41 indicator can also be used for collecting the measurement data.

The data is stored in the indicator's non-volatile memory which means that it

is not lost when the indicator is turned off. Please, note also that the automatic

power-off function is not active during data collecting even if previously

selected (see Chapter 8.3). When the data collecting has ended, the automatic

power-off function becomes active again.

6.1 Entering the data collecting mode

Enter the data collecting mode by turning the indicator on with the ON/OFF

button. The following appears for a couple of seconds:

set min max hyst hold Lo bat Hi

Pahg/m

°C °F

°C

°F

Release the ON/OFF button and press immediately the button HOLD. The

software version and the probe type indication appear, after which the display

changes automatically to show the battery charge:

bat

Within a couple of seconds the text REC AUTO appears on the display; release

the HOLD button.

This is the main display of the data collecting mode. With the button MODE

you can enter the REC CATCH mode (manual data collecting, see Chapter 6.2)

and by pressing MODE again, the REC READ mode (reading the measurement

results, see Chapter 6.5). By pressing ENTER, you can set the measurement

duration and by pressing ENTER again, the measurement interval (Chapters

6.3 and 6.4). By pressing HOLD, you can always return to the previous

display.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 71 72

Brak uwag

Vaisala HUMICAP HMP46 Podręcznik Użytkownika Strona 24